Model PRH-ROL-001-M

Condition New

Model PRH-ROL-003-M

Condition New

Model M007947

Condition New

The JV34-260 Printhead ID Set can be used in 4-colour or 8-colour printers and has a minimum, variable droplet size of 1.5 pico litre (max. droplet size is 21 pico litre). The typical firing frequency for the JV34-260 Printhead ID Set is 8 kHz.

The Ricoh GEN4 MH2420 printhead is suitable for a range of aqueous, solvent and UV printers. This printhead has an integrated heater and thermistor. This is Ricoh original printhead and it is covered by a manufacturer warranty. This cable including the connector is 44 cm long

Available for water ink & UV. Both types can be supplies with short (14 cm) and long (50 cm) cables. Please contact us by email to specify the head type and cable length.

The GIS HIB-KY-KJ4A-AA Head Interface Board is designed to provide communications between the Kyocera KJ4A-AA 600dpi printhead and the GIS Print Manager Boards

This new generation Kyocera KJ4B-0300 is designed for high speed single-pass applications with printers using aqueous ink. It is a 300dpi two colours printhead with a maximum drive frequency of 30kHz. It delivers high quality with a small drop volume of 5pl at 120 m/min by making use of 2,656 nozzles arranged across 112 mm wide print swathe.

This new generation Kyocera KJ4B-QA06NTB-MS6V-4B is designed  is designed for high speed printing of water-based inks. It is a 600dpi one colour printhead with a maximum drive frequency of 30kHz. It delivers high quality with a small drop volume of 5pl at 75 m/min by making use of 2,656 nozzles arranged across 108.25 mm wide print swathe with 0.042mm pitch, resulting in 30.000 drops per second.

This new generation Kyocera KJ4A-RH is designed for high speed single-pass and multi-pass applications with printers using UV ink. It is a 600dpi one colour printhead with a maximum drive frequency of 30kHz. It delivers high quality with a small drop volume of 5pl at 70 m/min by making use of 2,656 nozzles arranged across 108 mm wide print swathe with 0.042mm pitch, resulting in 30.000 drops per second.

The GIS HIB-KY-KJ4A-TA Head Interface Boards designed to provide communications between the Kyocera KJ4A-TA 600dpi 20kHz printhead and the GIS Print Manager Boards (PMB-C2 and PMB-C8-3)

Original Kyocera KJ4A TA06ATB STDC 4A Printhead