Model PRH-ROL-001-M

Condition New

Printer compatibility: VUTEk PressVu UV 200/600
This printhead is suitable for VUTEk PressVu UV 200/600 printers. This is the original VUTEk part (number AA90646).

Model PRH-ROL-003-M

Condition New

VUTEk Part : AA90646
Prime Printer Service Part #: PPS-AA90646
This Print Head/Jetpack fits the following models: PressVu 200 (PV200)

Model M007947

Condition New

Printer compatibility: VUTEk GS2000 / GS2000 Pro / GS2000LX / GS2000LX Pro / GS3200 / GS3200 Pro / GS3250 / GS3250 Pro / GS3250LX / GS3250LX Pro / GS3250r / GS5000r / QS2 Pro / QS3 Pro

The JV34-260 Printhead ID Set can be used in 4-colour or 8-colour printers and has a minimum, variable droplet size of 1.5 pico litre (max. droplet size is 21 pico litre). The typical firing frequency for the JV34-260 Printhead ID Set is 8 kHz.

This GS-508 (12 picoliters) print head is suitable for Vutek GS printers. This is the original Vutek print head. This product carries a manufacturer warranty.

The Ricoh GEN4 MH2420 printhead is suitable for a range of aqueous, solvent and UV printers. This printhead has an integrated heater and thermistor. This is Ricoh original printhead and it is covered by a manufacturer warranty. This cable including the connector is 44 cm long

Available for water ink & UV. Both types can be supplies with short (14 cm) and long (50 cm) cables. Please contact us by email to specify the head type and cable length.

The GIS HIB-KY-KJ4A-AA Head Interface Board is designed to provide communications between the Kyocera KJ4A-AA 600dpi printhead and the GIS Print Manager Boards

This new generation Kyocera KJ4B-0300 is designed for high speed single-pass applications with printers using aqueous ink. It is a 300dpi two colours printhead with a maximum drive frequency of 30kHz. It delivers high quality with a small drop volume of 5pl at 120 m/min by making use of 2,656 nozzles arranged across 112 mm wide print swathe.