Reference: Mimaki UJF-3042
The Ricoh GEN4 MH2420 printhead is suitable for a range of aqueous, solvent and UV printers. This printhead has an integrated heater and thermistor. This is Ricoh original printhead and it is covered by a manufacturer warranty. This cable including the connector is 44 cm long
Fast respond (Contact sales@printpartsupplies.com for the fastest handler)
Delivery policy (Free shipping under certain conditions)
Return policy (30 day money back guarantee and returns)
The Ricoh GEN4 MH2420 printhead is suitable for a range of aqueous, solvent and UV printers. This printhead has an integrated heater and thermistor. This is Ricoh original printhead and it is covered by a manufacturer warranty. This cable including the connector is 44 cm long. The version with short cable has been discontinued. The long cable version is used as an alternative. The printhead comes with hose barb ink inlet that can be removed in. case o-ring sealed ink inlet are required. This printhead corresponds to Ricoh part numbers N220792W, N220792S, N220792U or N220792E.
This head comes with hose barbs. The hose barbs can be removed if printhead with o-rings is needed.
Technical Specifications
- Size: 63 x 62.4 x 16,2 mm (excluding cables)
- Number of Nozzles: 2 x 192 nozzles
- Nozzle Spacing within a row: 0,1693 mm
- Nozzle spacing row to row: 0.529 mm
- Temperature Control: Integrated Heater and Thermistor
- Operator Temperature range: Up to 60° C
- Drop Volume Range: Binary mode: 7pl / Grey-scale mode: 7-35 pl
- Jetting Frequency: Up to 30 kHZ
- Surface tension: 28-35nM/m
- Viscosity range: 10-12 mPas
- Grey scale: 4 levels
- Number of ink ports: 2 x dual
- Life: 100 billion actuations per nozzle
This printhead carries a manufacturer warranty.
Country of origin : Japan
The Ricoh GEN4 MH2420 printhead is suitable for a range of aqueous, solvent and UV printers. This printhead has an integrated heater and thermistor. This is Ricoh original printhead and it is covered by a manufacturer warranty. This cable including the connector is 44 cm long
The JV34-260 Printhead ID Set can be used in 4-colour or 8-colour printers and has a minimum, variable droplet size of 1.5 pico litre (max. droplet size is 21 pico litre). The typical firing frequency for the JV34-260 Printhead ID Set is 8 kHz.
Available for water ink & UV. Both types can be supplies with short (14 cm) and long (50 cm) cables. Please contact us by email to specify the head type and cable length.
