New Original Ricoh GH2220 Printhead For UV Inkjet Printer

This Gen5 (MH5420/5440) N221345D Printhead Assy Type-D is suitable for Mimaki TS500-1800 & TX500-1800 series printers

This GEN5 UV printhead is suitable for a range of UV and solvent printers. It supports up to four colours and has a total of 1.280 nozzles

The new Ricoh GEN4L printhead is suitable for a range of oil, water, solvent and UV printers. This printhead has an integrated heater and thermistor. This is Ricoh original printhead and it is covered by a manufacturer warranty.

The new Ricoh GEN4L printhead is suitable for a range of oil, water, solvent and UV printers. This printhead has an integrated heater and thermistor.

The Ricoh GEN4 greyscale printhead is suitable for a range of water, solvent and UV printers. This printhead has an integrated heater and thermistor. This is Ricoh original printhead and it is covered by a manufacturer warranty. This Ricoh GEN4 is available in two different cable lengths: 19cm long and 44cm long and a choice of hose barb ink inlet or o-ring sealed ink inlet.

The Gen4 printhead is suitable for water-based, solvent, oily, uv ink,with an integrated heater and thermistor,has two different cable lengths: 19cm long and 44cm long and a choice of hose barb ink inlet or o-ring sealed ink inlet

This Ricoh GEN3-E3 (MH1603/1803/1903) printhead is suitable for DYSS Apollo UV R220 printers. This is the original Ricoh part.

The Ricoh GEN4 MH2420 printhead is suitable for a range of aqueous, solvent and UV printers. This printhead has an integrated heater and thermistor. This is Ricoh original printhead and it is covered by a manufacturer warranty. This cable including the connector is 44 cm long

The GIS HIB-KY-KJ4A-TA Head Interface Boards designed to provide communications between the Kyocera KJ4A-TA 600dpi 20kHz printhead and the GIS Print Manager Boards (PMB-C2 and PMB-C8-3)

This new generation Kyocera KJ4B-QA06NTB-MS6V-4B is designed  is designed for high speed printing of water-based inks. It is a 600dpi one colour printhead with a maximum drive frequency of 30kHz. It delivers high quality with a small drop volume of 5pl at 75 m/min by making use of 2,656 nozzles arranged across 108.25 mm wide print swathe with 0.042mm pitch, resulting in 30.000 drops per second.

This new generation Kyocera KJ4B-0300 is designed for high speed single-pass applications with printers using aqueous ink. It is a 300dpi two colours printhead with a maximum drive frequency of 30kHz. It delivers high quality with a small drop volume of 5pl at 120 m/min by making use of 2,656 nozzles arranged across 112 mm wide print swathe.